High-Strength FRP Structural Component for Industrial & Construction Applications
Our 200 x 100 x 10mm fiberglass I-profile represents advanced composite engineering, delivering high strength-to-weight ratio for demanding structural applications. Manufactured using precision pultrusion technology, this FRP (Fiber Reinforced Plastic) structural beam provides high corrosion resistance and lightweight design for demanding applications. Other depths in this pultruded I-profile range run from 120 mm up to 300 mm.
Our 200x100x10mm fiberglass I-profile is manufactured by pultrusion for consistent quality. Related FRP solutions: pultruded FRP profiles, FRP rebar, pultrusion machines, and pultrusion dies.
Technical Specifications
| Specification | Value | Performance Advantage |
|---|---|---|
| Profile Height | 200 mm | Optimal structural depth for load-bearing |
| Flange Width | 100 mm | Excellent lateral stability |
| Wall Thickness | 10 mm | Good strength-to-weight balance |
| Linear Weight | 7.2 kg/m | much lighter than steel for equal cross-section |
| Material Density | 1.8-2.1 g/cm³ | Lightweight construction |
| Fiber Content | 60-70% by weight | High strength properties |
| Service Temperature | -40°C to +120°C | Reliable in extreme conditions |
| Water Absorption | <0.2% (24hrs) | High moisture resistance |
Key Performance Benefits
High Strength-to-Weight Ratio
Our fiberglass I-profiles deliver high strength-to-weight ratio compared with steel for equal cross-section, reducing transportation costs, installation time, and structural load requirements.
High Corrosion Resistance
Unlike steel, our FRP profiles resist rust, corrosion, and degradation in many saltwater, acid, alkali, and harsh chemical environments. Suitable for marine and industrial environments where traditional materials fail.
Electrical & Thermal Insulation
Non-conductive properties provide inherent electrical safety, while thermal insulation characteristics reduce heat transfer and eliminate condensation issues.
Easy Installation & Fabrication
Can be cut, drilled, and machined using standard woodworking tools. No special equipment required, enabling on-site customization and faster installation compared to steel alternatives.
Low-Maintenance Operation
Low maintenance requirements and long service life. Reduces painting, sandblasting, and replacement costs compared with many traditional materials.
Material Comparison
| Property | Fiberglass I-Profile | Steel I-Beam | Aluminum I-Beam |
|---|---|---|---|
| Weight per Meter | 7.2 kg | 31.4 kg | 12.5 kg |
| Corrosion Resistance | Excellent | Poor | Good |
| Electrical Conductivity | Non-conductive | Conductive | Conductive |
| Maintenance Required | Minimal | High | Moderate |
| Service Life | Long service life (application dependent) | 20-30 years | 25-35 years |
Primary Applications
Marine & Offshore Structures
Ideal for docks, piers, offshore platforms, and marine walkways where saltwater corrosion resistance is critical.
Chemical Processing Facilities
Perfect for support structures, platforms, and frameworks in corrosive chemical environments where steel would deteriorate rapidly.
Water Treatment Plants
Excellent choice for wastewater treatment facilities, desalination plants, and water processing structures requiring non-corrosive materials.
Bridge & Infrastructure Projects
Suitable for pedestrian bridges, structural supports, and bridge deck systems requiring lightweight, durable solutions.
Electrical Infrastructure
Non-conductive properties make it ideal for support structures around electrical equipment and power transmission facilities.
Building Construction
Versatile solution for structural beams, roof supports, facade systems, and architectural elements in both residential and commercial projects.
Quality & Certifications
Our fiberglass I-profiles are manufactured to the highest international standards:
- CE Marking – European Conformity certification
- EN 13706 – European standard for reinforced plastic composites
- ISO 9001:2015 – Quality management system certification
- aBG Certification – German building authority approval
Each profile undergoes rigorous quality testing for dimensional accuracy, mechanical properties, and performance characteristics to ensure consistent, reliable performance.
Manufacturing Excellence
Produced using advanced continuous pultrusion technology ensuring:
- Consistent cross-sectional dimensions throughout entire length
- Controlled fiber orientation for maximum strength
- Reliable resin impregnation for enhanced durability
- Precise temperature and curing control
- Smooth, professional surface finish
Installation Guidelines
Tools Required: Standard woodworking and metalworking tools
Connections: Pre-drilling recommended for bolted connections
Fasteners: Stainless steel hardware recommended for optimal corrosion resistance
Cutting: Can be cut to length on-site using standard saw blades
Why Choose Our Fiberglass I-Profiles?
Proven Performance: Used in a wide range of climates and applications
Engineering Support: Our experienced team provides structural calculations, custom design optimization, and installation guidance
Long-term Value: Competitive total cost of ownership through extended service life and minimal maintenance requirements
Environmental Benefits: Sustainable choice with recyclable materials and reduced transportation emissions
Immediate Availability: Standard 6m and 12m lengths available; custom lengths quoted upon request
FAQ
What are the key dimensions and weight?
Height 200 mm, flange width 100 mm, wall thickness 10 mm. Linear weight 7.2 kg/m (6.98 kg/m Fiberline). Cross-sectional area 3890 mm² for optimal material efficiency.
What is the moment of inertia and modulus?
Moment of inertia Ix=23.6×10^6 mm⁴, Iy=4.8×10^6 mm⁴. E-modulus 30 GPa longitudinally. Excellent stiffness-to-weight ratio for long-span structural applications.
How much lighter than steel I-beams?
75% lighter than equivalent steel beams (steel ~25 kg/m vs FRP 7.2 kg/m). Reduces foundation loads, transportation costs, and crane requirements significantly.
Does it meet structural standards?
Yes. CE certified per EN13706 Type 2, aBG certified. Suitable for primary structural use in construction with verified load tables and design software available.
What applications use 200x100x10mm I-profiles?
Bridge girders, industrial platforms, cooling tower supports, chemical plant structures, marine walkways, and architectural frameworks in corrosive environments.
Is it corrosion resistant?
highly resistant to many chemicals, saltwater, and moisture. long service life with low maintenance requirements. Ideal for wastewater, offshore, mining, and aggressive industrial settings.
What resin systems are available?
Isophthalic polyester (standard), vinyl ester (chemical/marine), epoxy (maximum strength). Fire-retardant and UV-stabilized options for specific project requirements.
Are design calculations provided?
Yes. Full load span tables, deflection calculations (L/240 limit), connection details. Deflection governs design due to 1/5th steel modulus. Engineering support available.
Technical Support & Custom Solutions
Our engineering team offers comprehensive support including structural calculations, load analysis, custom profile design, and installation specifications. Contact us for project-specific requirements and technical consultation.
Request a Quote for 200x100x10mm Fiberglass I-Profile
Need 200x100x10mm fiberglass I-profile for your project? Contact us for a quote and we will confirm specifications, lead time, and pricing.
